Sort: Bike Sprocket
Material: 1045,Alloy, cast irion, 1571, Aluminum
motorbike chain: 428H
Entrance sprocket: 14T
Rear sprocket: 36T
Item name: Motorcycle sprocket and chain set CD110 for Brazil
Coloration: Gold,purple, yellow,pink,black,blue,environmentally friendly,chrome and so on.
Product: 428H, BW350, CV80 Riva eighty
Packing: Polybag+box+carton
Shipping Time: 21-30days
Thickness: AS Demands
12 months: 1983-1987, 1987-1988
Vehicle Fitment: Yamaha
Packaging Details: Plastic bag+carton box(Coloration box)
Port: ZheJiang new port

1. Mounting holes and tooth concentricity tolerance is .01mm2. Lightweight Higher-Functionality sprocket for added horsepower to the Entrance wheel3. Functions self cleansing grooves to very clear mud and boost sprocket life4. Innovative tooth profile, concentricity and precision of suit supply optimum power transfer and long-existence

Front sprocket:13T/14T/15T/16T/17T and so forth
Rear sprocket:34T/35T/36T/37T/38T/39T40T/41T/42T/43T and so on
Chain :420,428,428H,520,530 etc
Material:Stainless metal/ Carbon metal/ A3/ Aluminum etc
Surface TreatmentGalvanized/Chrome plating/Eletrophoretic plating/Sandblasting/ Dull polish/Spray finishing
Heat Treatment methodHigh frequency to enhance the hardness and tensile strengthGalvanize color-Zinc to rust protection
YAMAHA:JOG50,SR50,YB50,YB80,YB100,JY55,CX50,V50, Completed Bore Sprocket Transmission Harden Tooth Metric Stainless Metal Conveyor Push Roller Chain Idler Wheel Gear Sprocket V80,V90,T50,NF50,NX50,AXIS100,RS100,DX100,SRZ150,YBR125,Y110,XH100 and so on
Honda:GY650,GY660,GY680,GY6100,GY6125,GY6150,BT50,CD100,CD110,JH125,JH90,C70,C75,C100,C110,QJ110, FOR CZPT U35 U35S2 Mini Excavator Undercarriage Parts Rubber Keep track of Base Roller Provider Roller Idler Sprocket Complete Set L90,DY100 and so forth
SUZUKI :FR50, FR80, AD50, AD60, AG50, AG60, A100, AX100, K90, FB70, FB100, K100, K125, MAX100, GP125, GS125 and so on
JAWA :JAWA175, JAWA250 and so forth
KTM:KTM125,KTM85,KTM250,450 SX-F,350 SX-F,250 SX-F, chain generate differential with sprocket and cv shaft 250SX, 150SX,85 SX seventeen/14,65SX,50SX,50 SX MINI,1290 Tremendous DUKE R,790 DUKE,690DUKE,390 DUKE and many others
Package Software Regular industrial sprocket
DIN Standard Industrial Sprocket
BoreFinished bore, Precossing bore, Taper bore
ColorNature steel or black
StandardANSI, DIN, ISO
TypeSimplex, Duplex, Triplex
Surface remedyBlack oxide, Zinc plated
Heat therapyHigh Frenquency Quenching
Take a look at Warehouse showcase Firm Profile ZheJiang HAORONGSHENGYE Electrical Gear Co.,Ltdone. Was established in 20082. Our Basic principle: “Reliability Supremacy, and Client Initial” 3. Our Guarantee: “High high quality goods, and Superb Services” 4. Our Benefit: “Currently being Honesty, Carrying out the Very best, and Prolonged-long lasting Development” motor controller 4KW 5.5KW 7.5KW 380V variable pace variator with cupboard 5. Our Purpose: “Create to be a leader in the electricity transmission parts industry in the planet”
6.Our providers:1).Competitive value
2).Higher high quality products
3).OEM provider or can tailored according to your drawings
4).Reply your inquiry in 24 hours
5).Specialist specialized crew 24 hrs online support
6).Give sample provider

What is a sprocket?

A backlash sprocket is a sprocket with multiple teeth. The teeth are arranged at different intervals on the outer circumference of the sprocket. The bottoms of the tooth gaps are arcuate and connect opposing faces of adjacent teeth.
The backlash diameter on the backlash sprocket is larger than the diameter of the ISO tooth profile. This allows the rollers to engage the front surfaces of the teeth without causing the teeth to disengage. The result is reduced shock and noise.
as the picture shows. as the picture shows. As shown in FIG. 2, the sprocket 11 has a front surface (11a) and a rear surface (12b). The teeth are connected by a line extending from the center of rotation O of the sprocket to the center of the tooth gap bottom (13). The tooth surface on the sprocket is a convex arc of equal radius. The radius of re12a and re12b is larger than re8 of ISO tooth profile.
In addition to the tooth pitch of the sprockets, ISO sprockets have standard chains. This chain is defined as ISO 606 1994 (E). The sprocket pitch line is pc. The height of the tooth head (ha) is measured from the tooth pitch polygon.
Typically, the sprocket is secured to the shaft using one or more set screws. This means that it must be able to accommodate the keyway. To determine how much space is left, the outside diameter of the sprocket must be at least 10% larger than the pitch diameter of the shaft.
The gap tooth sprocket system provides extra precision for chain alignment. Its teeth are higher than ISO teeth.

ISO sprocket uniformity

ISO sprocket standard 606 specifies sprocket compliance for most of Europe. This standard specifies large spacings, measured in sixteenths of an inch, and expressed in metric units. It was developed before the American chain and was limited by the materials available. To ensure consistency, the ISO outer plate uses a chain size one step larger than the chain size required for the application. This results in a heavier chain. ISO sprockets are available in single, double and triple chain versions.
ANSI and ISO sprockets are interchangeable. They are based on mathematical themes and have a clear design. ISO sprockets are usually smaller than ANSI sprockets. They are also denoted with the suffix “B” to denote their chain number.

metal sprocket

Sintered metal sprocket is a metal sprocket with high mechanical properties. The tensile strength of the sprocket can reach more than 700 MPa, and the Charpy impact strength is 20 J/cm2. It’s also durable and wear-resistant.
This sprocket is used for high load applications. Its teeth are made of metal and flame-hardened. The edges of the teeth are slightly softer than the rest of the teeth. The edges of the sprockets wear out when bitten.
The sprocket is a toothed profiled wheel. It is different from a pulley that meshes with a belt. On the other hand, timing pulleys are used with toothed belts. Sprockets and chain mechanisms were also used in early cars.
Another common use for metal sprockets is in movie projectors, where they punch holes in the film. They are also used as the paper feed mechanism in some computer printers. There are several types of sprockets. Some sprockets are lightweight, while others are heavy and have flanges to keep the timing belt centered.

plastic sprocket

Plastic sprockets are ideal for a variety of applications. They reduce noise and reduce chain wear. Their compressibility also increases their overall load capacity. Some of their uses include dust-free environments, food applications and quieter chain drives. They can also be customized to your specifications.
One embodiment of the present invention includes a plastic sprocket having a co-injected outer shell and an inner core of a second material. This allows the sprocket to combine the advantages of both materials. This makes the sprocket easier to clean and lighter in weight.
There are many different materials available for plastic sprockets. One of the most popular is Duro-Glide(r) UHMW-PE. However, there are other materials that are better suited for certain applications. For example, polyurethane sprockets have excellent wear resistance, but may be too flexible to drive a belt. Therefore, it is important to find the right combination of materials to get the job done.
If you are in the market for a plastic sprocket, contact a reputable manufacturer. These companies offer a wide range of standard and custom sizes to meet any of your needs. They can also offer czpt delivery for quick turnaround. They specialize in custom manuManufactured and certified to ISO 9001:2000.
Imao offers sprockets in a variety of different materials. They are available in a variety of sizes and feature either molded ball bearings or fiberglass reinforced bearings. These sprockets are designed for sawmills and other light duty applications. They are also resilient and can be used in any type of sawmill.

Aluminum sprocket

Aluminum sprockets save weight and increase the speed of the bike. The material used to make them is 7075-T6 aerospace grade aluminum, which makes them lightweight and durable. The teeth are also formed on the hobbing machine so they fit perfectly and reduce friction. They also have an anodized color finish for added strength and durability.
The size you need depends on your wheel setup and the type of terrain you ride. Larger sprockets are better for slower terrain and provide more torque. However, larger sprockets tend to reduce top speed, so you may need to adjust accordingly. If you have an OEM 19″ or 16″ setup, 52t/54t sprockets are the most recommended option. 7075-T6 aluminum also reduces weight and rolling mass.
China Motorcycle rear sprocket 428H 36T for CD110     sprocket companyChina Motorcycle rear sprocket 428H 36T for CD110     sprocket company
editor by czh 2023-02-16